Swagger\Client\AdminApi

All URIs are relative to //api.estuary.tech/

Method	HTTP request	Description
adminMinersGet	GET /admin/miners/	Get all miners
adminPeeringPeersDelete	DELETE /admin/peering/peers	Remove peers on Peering Service
adminPeeringPeersGet	GET /admin/peering/peers	List all Peering peers
adminPeeringPeersPost	POST /admin/peering/peers	Add peers on Peering Service
adminPeeringStartPost	POST /admin/peering/start	Start Peering
adminPeeringStatusGet	GET /admin/peering/status	Check Peering Status
adminPeeringStopPost	POST /admin/peering/stop	Stop Peering
adminSystemConfigGet	GET /admin/system/config	Get systems(estuary/shuttle) config
adminUsersGet	GET /admin/users	Get all users

adminMinersGet

\Swagger\Client\Model\ApiMinerResp adminMinersGet()

Get all miners

This endpoint returns all miners. Note: value may be cached

Example

<?php
require_once(__DIR__ . '/vendor/autoload.php');
// Configure API key authorization: bearerAuth
$config = Swagger\Client\Configuration::getDefaultConfiguration()->setApiKey('Authorization', 'YOUR_API_KEY');
// Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
// $config = Swagger\Client\Configuration::getDefaultConfiguration()->setApiKeyPrefix('Authorization', 'Bearer');

$apiInstance = new Swagger\Client\Api\AdminApi(
    // If you want use custom http client, pass your client which implements `GuzzleHttp\ClientInterface`.
    // This is optional, `GuzzleHttp\Client` will be used as default.
    new GuzzleHttp\Client(),
    $config
);

try {
    $result = $apiInstance->adminMinersGet();
    print_r($result);
} catch (Exception $e) {
    echo 'Exception when calling AdminApi->adminMinersGet: ', $e->getMessage(), PHP_EOL;
}
?>

Parameters

This endpoint does not need any parameter.

Return type

\Swagger\Client\Model\ApiMinerResp

Authorization

bearerAuth

HTTP request headers

• Content-Type: Not defined
• Accept: application/json

[Back to top] [Back to API list] [Back to Model list] [Back to README]

adminPeeringPeersDelete

string adminPeeringPeersDelete($body)

Remove peers on Peering Service

This endpoint can be used to remove a Peer from the Peering Service

Example

<?php
require_once(__DIR__ . '/vendor/autoload.php');
// Configure API key authorization: bearerAuth
$config = Swagger\Client\Configuration::getDefaultConfiguration()->setApiKey('Authorization', 'YOUR_API_KEY');
// Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
// $config = Swagger\Client\Configuration::getDefaultConfiguration()->setApiKeyPrefix('Authorization', 'Bearer');

$apiInstance = new Swagger\Client\Api\AdminApi(
    // If you want use custom http client, pass your client which implements `GuzzleHttp\ClientInterface`.
    // This is optional, `GuzzleHttp\Client` will be used as default.
    new GuzzleHttp\Client(),
    $config
);
$body = array("body_example"); // string[] | Peer ids

try {
    $result = $apiInstance->adminPeeringPeersDelete($body);
    print_r($result);
} catch (Exception $e) {
    echo 'Exception when calling AdminApi->adminPeeringPeersDelete: ', $e->getMessage(), PHP_EOL;
}
?>

Parameters

Name	Type	Description	Notes
body	string[]	Peer ids

Return type

string

Authorization

bearerAuth

HTTP request headers

• Content-Type: /
• Accept: application/json

[Back to top] [Back to API list] [Back to Model list] [Back to README]

adminPeeringPeersGet

string adminPeeringPeersGet()

List all Peering peers

This endpoint can be used to list all peers on Peering Service

Example

<?php
require_once(__DIR__ . '/vendor/autoload.php');
// Configure API key authorization: bearerAuth
$config = Swagger\Client\Configuration::getDefaultConfiguration()->setApiKey('Authorization', 'YOUR_API_KEY');
// Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
// $config = Swagger\Client\Configuration::getDefaultConfiguration()->setApiKeyPrefix('Authorization', 'Bearer');

$apiInstance = new Swagger\Client\Api\AdminApi(
    // If you want use custom http client, pass your client which implements `GuzzleHttp\ClientInterface`.
    // This is optional, `GuzzleHttp\Client` will be used as default.
    new GuzzleHttp\Client(),
    $config
);

try {
    $result = $apiInstance->adminPeeringPeersGet();
    print_r($result);
} catch (Exception $e) {
    echo 'Exception when calling AdminApi->adminPeeringPeersGet: ', $e->getMessage(), PHP_EOL;
}
?>

Parameters

This endpoint does not need any parameter.

Return type

string

Authorization

bearerAuth

HTTP request headers

• Content-Type: Not defined
• Accept: application/json

[Back to top] [Back to API list] [Back to Model list] [Back to README]

adminPeeringPeersPost

string adminPeeringPeersPost($body)

Add peers on Peering Service

This endpoint can be used to add a Peer from the Peering Service

Example

<?php
require_once(__DIR__ . '/vendor/autoload.php');
// Configure API key authorization: bearerAuth
$config = Swagger\Client\Configuration::getDefaultConfiguration()->setApiKey('Authorization', 'YOUR_API_KEY');
// Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
// $config = Swagger\Client\Configuration::getDefaultConfiguration()->setApiKeyPrefix('Authorization', 'Bearer');

$apiInstance = new Swagger\Client\Api\AdminApi(
    // If you want use custom http client, pass your client which implements `GuzzleHttp\ClientInterface`.
    // This is optional, `GuzzleHttp\Client` will be used as default.
    new GuzzleHttp\Client(),
    $config
);
$body = array(new \Swagger\Client\Model\PeeringPeeringPeer()); // \Swagger\Client\Model\PeeringPeeringPeer[] | Peering Peer array

try {
    $result = $apiInstance->adminPeeringPeersPost($body);
    print_r($result);
} catch (Exception $e) {
    echo 'Exception when calling AdminApi->adminPeeringPeersPost: ', $e->getMessage(), PHP_EOL;
}
?>

Parameters

Name	Type	Description	Notes
body	\Swagger\Client\Model\PeeringPeeringPeer[]	Peering Peer array

Return type

string

Authorization

bearerAuth

HTTP request headers

• Content-Type: /
• Accept: application/json

[Back to top] [Back to API list] [Back to Model list] [Back to README]

adminPeeringStartPost

string adminPeeringStartPost()

Start Peering

This endpoint can be used to start the Peering Service

Example

<?php
require_once(__DIR__ . '/vendor/autoload.php');
// Configure API key authorization: bearerAuth
$config = Swagger\Client\Configuration::getDefaultConfiguration()->setApiKey('Authorization', 'YOUR_API_KEY');
// Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
// $config = Swagger\Client\Configuration::getDefaultConfiguration()->setApiKeyPrefix('Authorization', 'Bearer');

$apiInstance = new Swagger\Client\Api\AdminApi(
    // If you want use custom http client, pass your client which implements `GuzzleHttp\ClientInterface`.
    // This is optional, `GuzzleHttp\Client` will be used as default.
    new GuzzleHttp\Client(),
    $config
);

try {
    $result = $apiInstance->adminPeeringStartPost();
    print_r($result);
} catch (Exception $e) {
    echo 'Exception when calling AdminApi->adminPeeringStartPost: ', $e->getMessage(), PHP_EOL;
}
?>

Parameters

This endpoint does not need any parameter.

Return type

string

Authorization

bearerAuth

HTTP request headers

• Content-Type: Not defined
• Accept: application/json

[Back to top] [Back to API list] [Back to Model list] [Back to README]

adminPeeringStatusGet

string adminPeeringStatusGet()

Check Peering Status

This endpoint can be used to check the Peering status

Example

<?php
require_once(__DIR__ . '/vendor/autoload.php');
// Configure API key authorization: bearerAuth
$config = Swagger\Client\Configuration::getDefaultConfiguration()->setApiKey('Authorization', 'YOUR_API_KEY');
// Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
// $config = Swagger\Client\Configuration::getDefaultConfiguration()->setApiKeyPrefix('Authorization', 'Bearer');

$apiInstance = new Swagger\Client\Api\AdminApi(
    // If you want use custom http client, pass your client which implements `GuzzleHttp\ClientInterface`.
    // This is optional, `GuzzleHttp\Client` will be used as default.
    new GuzzleHttp\Client(),
    $config
);

try {
    $result = $apiInstance->adminPeeringStatusGet();
    print_r($result);
} catch (Exception $e) {
    echo 'Exception when calling AdminApi->adminPeeringStatusGet: ', $e->getMessage(), PHP_EOL;
}
?>

Parameters

This endpoint does not need any parameter.

Return type

string

Authorization

bearerAuth

HTTP request headers

• Content-Type: Not defined
• Accept: application/json

[Back to top] [Back to API list] [Back to Model list] [Back to README]

adminPeeringStopPost

string adminPeeringStopPost()

Stop Peering

This endpoint can be used to stop the Peering Service

Example

<?php
require_once(__DIR__ . '/vendor/autoload.php');
// Configure API key authorization: bearerAuth
$config = Swagger\Client\Configuration::getDefaultConfiguration()->setApiKey('Authorization', 'YOUR_API_KEY');
// Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
// $config = Swagger\Client\Configuration::getDefaultConfiguration()->setApiKeyPrefix('Authorization', 'Bearer');

$apiInstance = new Swagger\Client\Api\AdminApi(
    // If you want use custom http client, pass your client which implements `GuzzleHttp\ClientInterface`.
    // This is optional, `GuzzleHttp\Client` will be used as default.
    new GuzzleHttp\Client(),
    $config
);

try {
    $result = $apiInstance->adminPeeringStopPost();
    print_r($result);
} catch (Exception $e) {
    echo 'Exception when calling AdminApi->adminPeeringStopPost: ', $e->getMessage(), PHP_EOL;
}
?>

Parameters

This endpoint does not need any parameter.

Return type

string

Authorization

bearerAuth

HTTP request headers

• Content-Type: Not defined
• Accept: application/json

[Back to top] [Back to API list] [Back to Model list] [Back to README]

adminSystemConfigGet

string adminSystemConfigGet()

Get systems(estuary/shuttle) config

This endpoint is used to get system configs.

Example

<?php
require_once(__DIR__ . '/vendor/autoload.php');
// Configure API key authorization: bearerAuth
$config = Swagger\Client\Configuration::getDefaultConfiguration()->setApiKey('Authorization', 'YOUR_API_KEY');
// Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
// $config = Swagger\Client\Configuration::getDefaultConfiguration()->setApiKeyPrefix('Authorization', 'Bearer');

$apiInstance = new Swagger\Client\Api\AdminApi(
    // If you want use custom http client, pass your client which implements `GuzzleHttp\ClientInterface`.
    // This is optional, `GuzzleHttp\Client` will be used as default.
    new GuzzleHttp\Client(),
    $config
);

try {
    $result = $apiInstance->adminSystemConfigGet();
    print_r($result);
} catch (Exception $e) {
    echo 'Exception when calling AdminApi->adminSystemConfigGet: ', $e->getMessage(), PHP_EOL;
}
?>

Parameters

This endpoint does not need any parameter.

Return type

string

Authorization

bearerAuth

HTTP request headers

• Content-Type: Not defined
• Accept: application/json

[Back to top] [Back to API list] [Back to Model list] [Back to README]

adminUsersGet

string adminUsersGet()

Get all users

This endpoint is used to get all users.

Example

<?php
require_once(__DIR__ . '/vendor/autoload.php');
// Configure API key authorization: bearerAuth
$config = Swagger\Client\Configuration::getDefaultConfiguration()->setApiKey('Authorization', 'YOUR_API_KEY');
// Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
// $config = Swagger\Client\Configuration::getDefaultConfiguration()->setApiKeyPrefix('Authorization', 'Bearer');

$apiInstance = new Swagger\Client\Api\AdminApi(
    // If you want use custom http client, pass your client which implements `GuzzleHttp\ClientInterface`.
    // This is optional, `GuzzleHttp\Client` will be used as default.
    new GuzzleHttp\Client(),
    $config
);

try {
    $result = $apiInstance->adminUsersGet();
    print_r($result);
} catch (Exception $e) {
    echo 'Exception when calling AdminApi->adminUsersGet: ', $e->getMessage(), PHP_EOL;
}
?>

Parameters

This endpoint does not need any parameter.

Return type

string

Authorization

bearerAuth

HTTP request headers

• Content-Type: Not defined
• Accept: application/json

[Back to top] [Back to API list] [Back to Model list] [Back to README]